Audi 100/A6

1990-1997 of release

Repair and car operation


Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Hoses of system of cooling
   4.4. A radiator
   4.5. The thermostat
   4.6. The cooling fan
   + 4.7. Switches and gauges of system of cooling
   4.8. The water pump
   4.9. The heat exchanger liquid oil-/cooling
   4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


4.6. The cooling fan THE ELECTRIC FAN

Check

PERFORMANCE ORDER
Check up pressure giving on the fan. Check up the switch and a safety lock. If pressure arrives, but the fan does not work, replace it.

Removal

PERFORMANCE ORDER
1. Remove a radiator.
2. Turn off fixing bolts (arrows) and remove a fan casing.
3. Disconnect a socket of connection and turn off fixing nuts (arrow).
4. Unbend a uvula and turn off a fixing nut.
5. Remove the fan engine.

Installation

Installation is spent upside-down removals.

THE FAN OF COOLING WITH THE BELT DRIVE (5-CYLINDER ENGINES)

Check
PERFORMANCE ORDER
Examine муфту the fan on presence of traces of leak or damages. Replace the fan if it is necessary.

Removal
PERFORMANCE ORDER
1. Remove a cross-beam of fastening of a radiator.
2. Turn off муфту the fan and remove the fan.

Installation

Installation is spent upside-down removals.