Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. An exhaust system
   7.2. Technical characteristics
   7.3. System of gathering of steams of fuel
   + 7.4. Gathering system картерных gases
   - 7.5. System рециркуляции exhaust gases
      7.5.1. Device self-diagnostics
      7.5.2. A lamp накаливания and an anchor
      7.5.3. Candles накаливания
      7.5.4. The temperature gauge of a cooling liquid
      7.5.5. A temperature-sensitive element of soaked up air
   7.6. A final collector
   7.7. урбокомпрессор
   7.8. An intermediate cooler
   7.9. System of release of the fulfilled gases
   7.10. The Katalitichesky converter
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


7.5. System рециркуляции exhaust gases
THE GENERAL DATA

This system consists of the valve рециркуляции, модуляторного the valve and connecting hoses.

The valve рециркуляции and fixing bolts (the engine 1Z)

Fixing nuts of the valve рециркуляции (the engine 1Z)


Replacement of elements

VALVE RETSIRKULJATSII

PERFORMANCE ORDER
1. Disconnect a vacuum hose from the valve (on fig. at the left – engine AAT, on the right – 1Z).
2. Turn off fixing bolts and remove a lining.
3. Turn off fixing nuts and remove the valve.
4. Installation is spent upside-down removals.