Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   + 9.1.2. Technical characteristics
   - 9.2. A Mehnichesky transmission
      + 9.2.2. Technical characteristics
      9.2.3. The gear change mechanism
      9.2.4. Removal and installation МКПП
      9.2.5. Partition МКПП
      9.2.6. The multipurpose switch and the switch of lanterns of a backing
      9.2.7. The speedometer gauge
      9.2.8. Epiploons
      9.2.9. Evident repair of a transmission 012
   + 9.3. An automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

9.2.8. Epiploons Replacement

EPIPLOONS OF LEADING SHAFT

PERFORMANCE ORDER

1. Lift and fix a forward part of the car.

2. Disconnect a shaft from a corresponding leading flange.

3. Unscrew the central bolt.

4. Remove a lock ring and take an epiploon by means of a screw-driver.

5. Grease a new epiploon with greasing and establish into place.

6. Establish a new lock ring ().

EPIPLOON OF THE ENTRANCE SHAFT

PERFORMANCE ORDER

1. Remove a transmission.

2. Remove squeezing the bearing and squeezing a clutch lever.

3. Remove directing plug.

4. Remove a lock ring and take an epiploon by means of a screw-driver.

5. Take an old epiploon by means of a screw-driver.

6. Grease a new epiploon with greasing and hammer it into place.

EPIPLOON OF THE SWITCHING ROD

PERFORMANCE ORDER

1. Lift and fix a forward part of the car.

2. Unscrew a lock bolt and disconnect switching rod.

3. By means of a small screw-driver take an epiploon from a transmission casing.

4. Establish a new epiploon.