Audi 100/A6

1990-1997 of release

Repair and car operation


Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
   11.2. Technical characteristics
   11.3. The general description of adjustment of wheels
   + 11.4. A forward suspension bracket
   + 11.5. A back suspension bracket
   - 11.6. A steering
      11.6.2. A steering column
      11.6.3. The lock of ignition / the lock of a steering column
      11.6.4. The steering mechanism
      11.6.5. Пыльники the steering mechanism
      11.6.6. System of the hydraulic booster of a steering
      11.6.7. The pump of system of the hydraulic booster of a steering
      11.6.8. The spherical hinge of steering draught
      11.6.9. Steering draught
   + 11.7. Semiaxes
   11.8. Easily and easy
   11.9. Maintenance service of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


11.6. A steering

11.6.1. A steering wheel MODELS WITHOUT THE SAFETY AIR CUSHION

Removal

PERFORMANCE ORDER
1. Establish forward wheels directly and close a steering column.
2. Remove the panel in the steering wheel centre.
3. Turn off a fixing nut, mark position of installation of a steering wheel on a shaft of a steering column and remove a steering wheel.

Installation

Installation is spent upside-down removals.

MODELS WITH THE SAFETY AIR CUSHION
The prevention

Observe safety measures at work with the module of an air cushion of safety.

Removal
PERFORMANCE ORDER
1. Remove the module of an air cushion of safety.
2. Establish forward wheels directly and close a steering column.
3. Turn off two fixing screws and remove the top casing of a steering column.
4. Disconnect a socket of connection of the contact module of an air cushion of safety.
5. Turn off a fixing nut, mark position of installation of a steering wheel on a shaft of a steering column and remove a steering wheel.

Installation

Installation is spent upside-down removals.