Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
11.2. Technical characteristics
11.3. The general description of adjustment of wheels
+ 11.4. A forward suspension bracket
+ 11.5. A back suspension bracket
- 11.6. A steering
11.6.2. A steering column
11.6.3. The lock of ignition / the lock of a steering column
11.6.4. The steering mechanism
11.6.5. Пыльники the steering mechanism
11.6.6. System of the hydraulic booster of a steering
11.6.7. The pump of system of the hydraulic booster of a steering
11.6.8. The spherical hinge of steering draught
11.6.9. Steering draught
+ 11.7. Semiaxes
11.8. Easily and easy
11.9. Maintenance service of system of a steering
11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
|
Removal
| PERFORMANCE ORDER |
| 1. Remove a corresponding forward wheel. |
| 2. Turn off a fixing nut of the spherical hinge and disconnect the hinge from a rack of a suspension bracket by means of the tool for division of spherical hinges. |
| 3. Turn off a fixing bolt of steering draught on the steering mechanism and remove draught from the car. |
|
Installation
Installation is spent upside-down removals.
| PERFORMANCE ORDER |
| |
Do not mix position of installation of draught. Check up, that draughts have been established so that internal fastenings 1 and spherical hinges 2 have been turned in the correct party. |
|
|
|