Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
- 3.3. Removal and a partition of engines
   + 3.3.2. Technical characteristics
   3.3.3. Repair work, possible without engine dismantle
   + 3.3.4. Major repairs
   3.3.5. Removal and engine installation
   3.3.6. An engine partition
   + 3.3.7. A head of cylinders
   3.3.8. Pistons and rods
   + 3.3.9. A cranked shaft
   3.3.10. An intermediate shaft
   3.3.11. The block of cylinders
   3.3.12. Radical bearings and bearings of rods
   3.3.13. Piston rings
   3.3.14. The first start of the engine after a partition
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


3.3.10. An intermediate shaft

Removal

PERFORMANCE ORDER
1. Remove газораспределительный a belt and an asterisk of an intermediate shaft.

2. Measure a shaft free wheeling. If necessary replace a shaft.
3. Remove a flange of a shaft and get an epiploon and a sealing ring. For this purpose олабьте bolts.
4. Remove a flange of an intermediate shaft.
5. Take an epiploon.
6. Get a sealing ring.
7. Get a shaft and examine it on presence of deterioration and damages. If necessary replace a shaft.

Installation

Installation is made in sequence, return to removal.