Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
- 3.3. Removal and a partition of engines
+ 3.3.2. Technical characteristics
3.3.3. Repair work, possible without engine dismantle
+ 3.3.4. Major repairs
3.3.5. Removal and engine installation
3.3.6. An engine partition
+ 3.3.7. A head of cylinders
3.3.8. Pistons and rods
+ 3.3.9. A cranked shaft
3.3.10. An intermediate shaft
3.3.11. The block of cylinders
3.3.12. Radical bearings and bearings of rods
3.3.13. Piston rings
3.3.14. The first start of the engine after a partition
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
|
Removal
PETROL ENGINES
| PERFORMANCE ORDER |
| 1. Lift and fix a forward part of the car. |
| 2. Remove a cowl. |
| 3. Disconnect a wire of the minus plug of the accumulator. |
| 4. Merge oil and cooling liquid. |
| 5. Remove the top cover of the engine. |
| 6. Disconnect hoses from a radiator and a broad tank. |
|
4-CYLINDER PETROL ENGINES
| PERFORMANCE ORDER |
| 7. Remove cooling fan of a radiator. |
|
5-CYLINDER PETROL ENGINES
| PERFORMANCE ORDER |
| 8. Remove a forward bumper and the radiator fan. |
| 9. Remove a radiator. |
| 10. In models with the air conditioner, unscrew radiator bolts, unscrew its arm and shift a radiator forward, having fixed it on a support. |
| 11. In models AAR and ANN, disconnect hoses and lift the receiver a cooling liquid in the left part of the engine. Uncover the left leading shaft and disconnect an exhaust pipe and каталитический the converter from a final collector. |
| 12. Disconnect an exhaust pipe from an arm. Disconnect fuel tubes from the fuel distributor. |
|
ALL MODELS
| PERFORMANCE ORDER |
| 13. Disconnect all wires disturbing to engine removal. |
| 14. Disconnect a branch pipe connecting the air filter and a throttle. |
| 15. Disconnect tubes of giving and fuel return. Disconnect an accelerator rope. |
| 16. Disconnect hoses from a heater radiator. |
| 17. Disconnect a wire from the switch of lanterns of a backing located on a transmission. |
| 18. Remove additional belts. |
| 19. Remove the compressor of the air conditioner, without disconnecting from it hoses. |
| 20. Remove the pump of the hydraulic booster of a steering, without disconnecting from it hoses. |
| 21. In engines with an automatic transmission, disconnect tubes трансмиссионной liquids from the oil pallet of the engine. |
| 22. Remove a starter. |
| 23. Unscrew bolts, fixing a leading disk to the hydrotransformer. |
| 24. Disconnect an exhaust pipe from a collector. |
| 25. Unscrew bolts, fixing a transmission to the engine. Leave not unscrewed the top bolt. |
| 26. Fix the engine on the lift. |
| 27. Braid nuts of fastenings of the engine. |
| 28. Establish a jack under a transmission. |
| 29. Unscrew last bolt and remove the engine. |
| If necessary, remove an intermediate plate of the engine and coupling. |
|
DIESEL ENGINES
| PERFORMANCE ORDER |
| 1. Remove a cowl. |
| 2. Disconnect a wire of the minus plug of the accumulator. |
| 3. Merge oil and cooling liquid. |
| 4. Lift and fix a forward part of the car. |
|
4-CYLINDER DIESEL ENGINES
| PERFORMANCE ORDER |
| 5. Remove the top cover of the engine. |
| 6. Remove cooling fan. |
| 7. Remove an air inlet located on a radiator. |
| 8. Remove the air filter. |
| 9. Disconnect the electromagnetic valve of the control of pressure. |
| 10. Remove tubes connecting the heat exchanger both an inlet collector, and the heat exchanger and турбонагнетатель. |
| 11. Disconnect an exhaust pipe from турбонагнетателя. |
|
5-CYLINDER DIESEL ENGINES
| PERFORMANCE ORDER |
| 12. Remove a forward bumper and the radiator fan. |
| 13. Remove a radiator. |
| 14. In models with the air conditioner, Unscrew radiator bolts, unscrew its arm and shift a radiator forward, having fixed it on a support. |
| 15. Remove a cross-beam located a back part of a transmission (ABP, AAT, AEL). In models AAS remove a forward support of the engine. |
| 16. Uncover приводного a belt of the fuel pump. |
| 17. Remove the air filter. |
| 18. Remove tubes connecting the heat exchanger both an inlet collector, and the heat exchanger and турбонагнетатель. |
| 19. Disconnect hoses from an inlet collector and the valve of adjustment of final gases. |
|
|
20. Disconnect a wire of grounding from an arm of the right support of the engine. |
|
|
| 21. Disconnect an arm of the fuel filter from an arm of the left support of the engine. |
|
|
22. Remove a forward support of the engine. |
|
ALL MODELS
| PERFORMANCE ORDER |
| 23. Disconnect hoses from a radiator, heads of cylinders and a broad tank. |
| 24. Disconnect wires from the generator. |
|
|
|
| 25. Disconnect the conducting, disturbing to engine removal. |
| 26. Disconnect tubes of giving and return of fuel from the fuel pump. |
| 27. Disconnect an accelerator rope. |
| 28. Disconnect vacuum hoses. |
| 29. Disconnect hoses from a heater radiator. |
| 30. Disconnect wires from the gauge of a speedometer and the switch of light of lanterns of a backing. |
| 31. Remove additional belts. |
| 32. Remove the compressor of the air conditioner, without disconnecting from it hoses. |
| 33. Remove the pump of the hydraulic booster of a steering, without disconnecting from it hoses. |
|
|
| 34. Unscrew bolts and remove a pulley of the pump of the hydraulic booster. |
|
|
| 35. Unscrew bolts and remove the pump. |
| 36. In engines with an automatic transmission, disconnect tubes трансмиссионной liquids from the oil pallet of the engine. |
| 37. Remove a starter. |
| 38. Unscrew bolts, fixing a leading disk to the hydrotransformer. |
| 39. Disconnect an exhaust pipe and каталитический the converter from a final collector. |
|
|
40. Unscrew bolts, fixing a transmission to the engine. Leave not unscrewed the top bolt. |
| 41. Fix the engine on the lift. |
|
|
| 42. Braid a nut of a support and remove washers. |
| 43. Establish a jack under a transmission. |
|
|
44. Unscrew last bolt and remove the engine. |
| 45. If necessary remove coupling. |
|
Installation
ALL ENGINES
Installation is spent upside-down removals, thus do not forget to grease шлицы a leading shaft of the engine with greasing with a fusion heat. |
|