Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1.1.2. Technical characteristics
      3.1.1.3. Sinhronizatsionnye labels timing
      3.1.1.4. Compression check
      3.1.1.5. A gazoraspredelitelnyj belt
      3.1.1.6. Натяжитель газораспределительного a belt, an asterisk
      3.1.1.7. Additional приводные belts
      3.1.1.8. A camshaft cover
      3.1.1.9. A camshaft epiploon
      3.1.1.10. An epiploon of an intermediate shaft
      3.1.1.11. Epiploons of a cranked shaft
      3.1.1.12. A head of cylinders
      3.1.1.13. Hydraulic pushers
      3.1.1.14. A flywheel
      3.1.1.15. Engine fastenings
      3.1.1.16. The oil pallet
      3.1.1.17. The oil pump and маслозаборный a branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


3.1.1.16. The oil pallet
THE GENERAL DATA

The oil pallet (ADR)


Removal

PERFORMANCE ORDER
1. Lift and fix a forward part of the car.
2. Remove the bottom guard of the engine.
3. Merge engine oil and get oil probe.
4. Fix the engine on the lift.
5. Remove a forward cover of a transmission.
6. Braid the bottom nuts of a support of the engine.
7. Establish a jack under a cross-beam of a forward suspension bracket, unscrew bolts and slightly lower a cross-beam.
8. Unscrew pallet bolts.
9. Remove the pallet.

Installation

PERFORMANCE ORDER
Clean surfaces of the pallet and the block of cylinders and establish a new lining. Installation is spent upside-down removals.