Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
   - 3.1.1.2. Technical characteristics
      3.1.1.3. Sinhronizatsionnye labels timing
      3.1.1.4. Compression check
      3.1.1.5. A gazoraspredelitelnyj belt
      3.1.1.6. Натяжитель газораспределительного a belt, an asterisk
      3.1.1.7. Additional приводные belts
      3.1.1.8. A camshaft cover
      3.1.1.9. A camshaft epiploon
      3.1.1.10. An epiploon of an intermediate shaft
      3.1.1.11. Epiploons of a cranked shaft
      3.1.1.12. A head of cylinders
      3.1.1.13. Hydraulic pushers
      3.1.1.14. A flywheel
      3.1.1.15. Engine fastenings
      3.1.1.16. The oil pallet
      3.1.1.17. The oil pump and маслозаборный a branch pipe
   + 3.1.2. 5-cylinder engines
   + 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

3.1.1.3. Sinhronizatsionnye labels timing

THE GENERAL DATA

Asterisks of a cranked shaft, camshaft and intermediate shaft have a drive from газораспределительного a belt and rotate inphase.

If phase synchronism of rotation of asterisks is broken, valves will concern pistons during rotation of a cranked shaft.

The highest point which reaches piston N1 at the moment of a compression step is accepted to the top dead point.

PERFORMANCE ORDER

1. Combining синхронизационные labels, establish piston N1 in ВМТ for maintenance of phase synchronism of rotation of asterisks.

2. To establish piston N1 in ВМТ, remove the top cover of the engine.

3. Uncover the distributor and note position of a wire of cylinder N1.

4. Unscrew all candles.

5. Turn a cranked shaft clockwise and define, when the piston will make a compression step.

6. Continue to turn a cranked shaft, while синхронизационные labels of an asterisk of a camshaft and a flywheel not совместяться with labels corresponding to them on a cover of a belt and a transmission.